Water Treatment Agents
Water Treatment Agents
WATER DECOLOURING AGENT TF-2703
Suitable for decoloring of printing and dyeing wastewater；also can be used in treating high colourity wastewater from dyestuff intermediate production.
1. The product shall be diluted with 10-50 times water.
2. Then added to the wastewater, adjust pH=6-9, then stirring, it can be precipitated or air-floated to become clear water.
3. When the color of wastewater is deep and CODcr of wastewater is high, this product should be used in combination with inorganic flocculant to significantly reduce the cost of treatment.
4. Recommend 5-200g of original liquid per ton of wastewater.
Determine the actual dosage is according to lab test.
WATER DECOLOURING AGENT TF-2705
Suitable for color wastewater treatment of printing and dyeing；also can be used in treating high colourity wastewater from dyestuff intermediate production.
1. The product shall be diluted with 10-50 times water.
2. Then added to the wastewater, adjust pH=6-9, then stirring, it can
be precipitated or air-floated to become clear water.
3. When the color of wastewater is deep and CODcr of wastewater is
high, this product should be used in combination with inorganic
flocculant to significantly reduce the cost of treatment.
4. Recommend 5-200g of original liquid per ton of wastewater.
Determine the actual dosage is according to lab test.
COAGULANT AID TF-2713
Used as a coagulant for industrial wastewater flocculation treatment; Suitable for the wastewater treatment of printing&dyeing and paper making.
1. General dosage is 1-10mg/L, product need dilute to 1‰-5‰ concentration in the aqueous solution before dosing.
2. Evenly dose the powder into stirring water when dissolved, appropriate heating （＜60℃）can accelerate the dissolution.
3. Be fit to do experiment before determine the best dosage.
COAGULANT AID TF-2721
As a coagulant for industrial wastewater flocculation treatment; Suitable for the wastewater treatment of printing&dyeing and paper making.
1. General dosage is 1-10mg/L, product need dilute to 1‰-2‰ concen tration in the aqueous solution before dosing.
2. Evenly dose the powder into stirring water when dissolved, appropriate heating （＜60℃）can accelerate the dissolution.
3. Be fit to do experiment before determine the best dosage.
COAGULANT TF-2732
As a coagulant for industrial wastewater or purification of municipal sewage. Suitable for purifying treatment of printing and dyeing, papermaking, leather, heavy metal, food and other industrial wastewater.
1. Prepare the product into 5-10% solution with clear water before use, and use it after mixing evenly.
2. According to the actual water quality, determine the best dosage through lab test.
DEFOAMING AGENT TF-2810
As a new type of special polyether modified silicon defoamer in industrial, biochemical and other wastewater treatment; Long-term use is conducive to curbing sludge bulking of ETP aeration pond.
1. it can be used directly or diluted, shall be diluted with 1-10 times water;
2.General dosage 1-100mg raw product/Litre of sewage;
3. The specific dosage is determined by the user according to the property of foam and the number of pollutants.
Write your message here and send it to us