LDPE JD-6116
LDPE JD-6116
|
Product Type |
LDPE – low-density polyethylene |
|
Product Status |
COMMERCIAL |
|
Applications |
Coaxial and CATV cables |
Properties
|
PHYSICAL |
Unit |
Test Method |
Test Condition |
Typical Value |
|
Density |
g/cm³ |
GB/T1033.1-2008 |
23 °C (slice) |
0.919 |
|
0.913 |
||||
|
Melt Flow Rate |
g/10min |
GB/T3682.1-2018 |
120°C/5kg |
0.67 |
|
Shore hardness |
Shore D |
GB/T2411-2008 |
4mm/5s |
47±3 |
|
Tensile strength |
MPa |
GB/T1040.3-2006 |
50mm/min |
12 |
|
Elongation at break |
% |
GB/T1040.3-2006 |
50mm/min |
500 |
|
Dielectric Constant є |
- |
GB/T1409-2006 |
1MHZ |
2.34 |
|
Dielectric Loss Factor |
- |
GB/T1409-2006 |
1MHZ |
6.0*10-4 |
*Unless otherwise noted, the above data represent performance measured in the laboratory at 23°C and 50% RH. These values are representative figures obtained in our laboratory, not intended for legal judgment, and are for reference only.
Recommended processing conditions
Suggested drying conditions are drying at 80°C for 2 hours. The melt extrusion temperature is controlled within the recommended temperature range:
|
Zone |
Zone1 |
Zone2 |
Zone3 |
Zone4 |
Zone5 |
Zone6-8 |
Neck 2 |
Die head |
|
|
125-135 |
135-150 |
140-160 |
140-160 |
140-160 |
140-160 |
140-160 |
140-160 |
140-160 |
*The above temperatures are for reference only. The actual processing temperature should be set according to the machine and process requirements, etc.
Packing & Shipping
【PACKING】
Granules. 25 kg bags.
【STORAGE】
Store in a cool, dry place, away from open flames and away from direct sunlight.
【SAFETY CONSIDERATIONS】
This product is not classified as a hazardous material, but please refer to the relevant MSDS before using this material. During transportation, avoid exposure to direct sunlight or rain. Do not mix with sand, metal scraps, coal, glass, or other similar materials, and under no circumstances should it be transported together with toxic, corrosive, or flammable substances. During loading and unloading, sharp tools such as iron hooks are strictly prohibited. Handle with care to avoid throwing or dropping, which may damage the packaging bags.
