HDPE JD-6107

Short Description:

JD-6107 is a chemical foamable HDPE insulation material developed from high molecular weight HDPE, offering high mechanical strength and excellent electrical properties. It supports high-speed extrusion and is particularly suitable for insulation layers of communication cables such as HDMI, VGA, USB, and RGB. With precise control of extrusion temperature, JD-6107 can achieve a foaming degree of up to 50%.

Send email to us

Product Detail

Product Tags

Product Type	HDPE – high-density polyethylene
Product Status	COMMERCIAL
Applications	HDMI/VGA/USB/RGB and other communication cable insulation layer

Properties

PHYSICAL	Unit	Test Method	Test Condition	Typical Value
Density	g/cm³	GB/T1033.1-2008	23 °C (slice)	0.943
Density	g/cm³	GB/T1033.1-2008	23 °C(granule)	0.935
Melt Flow Rate	g/10min	GB/T3682.1-2018	140°C/5kg	1
Shore hardness	Shore D	GB/T2411-2008	4mm/5s	62±3
Tensile strength	MPa	GB/T1040.3-2006	50mm/min	28
Elongation at break	%	GB/T1040.3-2006	50mm/min	750
Dielectric Constant є	-	GB/T1409-2006	1MHZ	2.32
Dielectric Loss Factor	-	GB/T1409-2006	1MHZ	2.0*10-4
Oxidation induction period	min	GB/T2951.42-2008	180°C/A1	＞60min

*Unless otherwise noted, the above data represent performance measured in the laboratory at 23°C and 50% RH. These values are representative figures obtained in our laboratory, not intended for legal judgment, and are for reference only.

Recommended processing conditions

Suggested drying conditions are drying at 80°C for 2 hours, with the melt extrusion temperature controlled within the recommended temperature range:

Zone	Zone1	Zone2	Zone3	Zone4	Zone5	Zone6-8	Neck 1	Neck 2	Die	Die head
Temp °C	160-180	180-200	190-210	190-220	190-220	190-220	195-220	195-220	195-220	195-220

*The above temperatures are for reference only. The actual processing temperature should be set according to the machine and process requirements, etc.

Packing & Shipping

【PACKING】

Granules. 25 kg bags.

【STORAGE】

Store in a cool, dry place, away from open flames and away from direct sunlight.

【SAFETY CONSIDERATIONS】

This product is not classified as a hazardous material, but please refer to the relevant MSDS before using this material. During transportation, avoid exposure to direct sunlight or rain. Do not mix with sand, metal scraps, coal, glass, or other similar materials, and under no circumstances should it be transported together with toxic, corrosive, or flammable substances. During loading and unloading, sharp tools such as iron hooks are strictly prohibited. Handle with care to avoid throwing or dropping, which may damage the packaging bags.

Previous: F-PP JD-6127

Next: LDPE JD-6116

Write your message here and send it to us